2019 Caterpillar Model XQ125 Generator
3d7h(May 17, 2026 07:00 PM UTC)
$25.00 USD
Bid IncrementOnline Auction — Subject to Seller Confirmation
Location:
Elliot Lake, Ontario, CANRemoval & Shipping:
Buyer Must Arrange. See details.
Subject to an auto-extension of the auction end time.
Possible Bad Bid
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
| Manufacturer | Caterpillar |
| Model | XQ125 |
| Year of Manufacture | 2019 |
| Serial Number | CK500608 |
| Condition | Used/See Description |
| Odometer/Hours | 5,172 Hours (Unknown) |
| Title Restriction | Yes: No Title |
| Lot Number | 27592-12 |
| Inventory ID | GEN1 |
Generator Starts and Runs
Generator In Good Condition
Manufacturer's Specifications:
Power Output
Standby Power: 110 kW / 137 kVA
Prime Power: 100 kW / 125 kVA
Frequency: 60 Hz
Speed: 1,800 RPM
Power Factor: 0.8
Phase: 3-Phase
Standard Voltages: 480/277V, 208/120V, 240/120V
Optional Voltage: 600/349V
Emissions: EPA Tier 4 Final / CARB Certified
Engine — Cat C4.4 ACERT
Configuration: 4-Cylinder, Inline, 4-Stroke, Water-Cooled Diesel
Rated HP: 134 HP
Speed: 1,800 RPM
Governor Type: ADEM (electronic)
Cooling: Engine-Driven Radiator with Vertical Air Discharge
Air Filtration: Cyclonic/Paper with dust cup and service indicator
Starting: 12V Electric Start
Oil Filters: On-engine primary and secondary
Alternator — Cat LC3114F
Frame Size: LC3114F
Pitch: 2/3
Number of Poles: 4
Number of Leads: 12
Excitation: Self-Excited / PMG (Permanent Magnet Generator)
Bearings: Single bearing, close coupled
Insulation Class: H
Enclosure: Drip Proof IP23
Voltage Regulator: 3-phase sensing with volts-per-hertz
Voltage Regulation: Less than ±0.5%
Harmonic Distortion (THD): Less than 5%
Overspeed Capability: 125% of rated
Fuel & Fluids
Fuel Tank Capacity: 150 gallons (UL 142 double-wall)
Fuel Burn at Max Load: 26.1 gal/hr
DEF Tank: 8 gallons
Fuel Tank: Double-wall sub-base with 3-way directional valve
Control & Electrical
Control Panel: EMCP 4.2B Digital
Circuit Breaker: 400 Amp shunt trip, adjustable main-line
Distribution: Multi-voltage connection board
Battery Charger: Sens battery charger
Optional: Coolant heater, synchronizing controls
Dimensions & Weight
Length: 176 in
Width: 78 in
Height: 86 in
Operating Weight: ~6,800–7,311 lbs (with fuel)
Tire Size: 225/75/R15
Transport: Tandem axle trailer, pintle hitch, electric brakes
Noise & Enclosure
Enclosure: Sound attenuated, galvanized steel
Noise Level: 65 dBA at 23 ft (7 meters) at prime rating
**Disclaimer: The manufacturer's specifications provided are for reference only, and we disclaim any liability for inaccuracies or discrepancies. Specifications may vary by model or trim, and stock photos are used for illustrative purposes only and may not accurately represent the actual product. Please refer to the actual product for precise details.**
Q & A
Have a question or looking to schedule an appointment?
Seller Information
Seller:
Item Location:
Account Type:
Commercial
Inspection
Payment
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.
Note:
1. STRICT REQUIREMENT - Payment is due within 3 (three) days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit/debit card or PayPal. For more insight, please visit the Probation FAQ.
SALES TAX: Vehicles with an auction/item location in Arizona
If you have officially won and are seeking tax exemption, you must complete Liquidity Services’ tax form BEFORE THE AUCTION ENDS. Failure to pay due to unresolved tax exemption issues will be treated as a default for non-payment and may result in your account being banned. If you intend to bid on this item, your tax exemption must be completed and approved BEFORE the auction ends. No exceptions will be made.
Please click the applicable hyperlink below.
**If you are removing the vehicle yourself, a 90-day permit is required. Please contact Cashiers@sierraauction.com to obtain the permit. The fee is $55. If a transporter is handling the pickup, a Bill of Lading must be provided.**
Bidders within a Native American Reservation in Arizona
SALES TAX: All items except for vehicles with an auction/item location in Arizona
If you are seeking tax exemption, you must complete Liquidity Services’ tax form(s).
**Please refer to the Removal Instructions section for detailed steps required to schedule the pickup of your vehicle.**
Removal
Important Pickup Instructions
To receive the pickup instructions and have the title and vehicle released, please make sure the following steps are completed. Once these are done, we will provide the point of contact information for the pickup.
Complete the Bidder Agreement Form:
- Submit a fully completed Bidder Agreement form and upload a valid photo ID using [THIS LINK].
- Once your Bidder Agreement has been reviewed and approved, our Cashiers will email you the pickup details, including the pickup location and contact person’s information.
If Sending a Representative:
- If someone else will be picking up on your behalf, please email the representative’s full name to cashiers@sierraauction.com.
- The representative must present a valid ID and sign for the item(s) at the time of pickup.
Buyer Responsibilities:
The buyer is responsible for all aspects of item removal, including but not limited to packing, loading, transportation, and exporting.
Pickup Deadline:
All items must be picked up and removed within five (5) business days from the auction close, unless otherwise stated in the asset description.
Items not removed within this timeframe may result in one or more of the following actions: (1) the item(s) may be declared abandoned with no refund provided, (2) storage fees of $20 per day may be charged, or (3) the sale may be canceled and a fee equal to the Buyer’s Premium may be assessed.
Load-Out Information:
Buyers are responsible for their own load-out, rigging, removal, and transport. A forklift may not be available on-site.
Title Information:
Titles are mailed to the address and name listed on the Buyer’s Certificate.
To request a change of address, name transfer, or other title update, email our Title Department at jessica.miranda@sierraauction.com within three (3) days of the auction closing.
Requests received after this period may incur additional fees, including a $25 returned title fee and/or a $95 duplicate title fee.
Important Notice – Shipping Not Available
Shipping is NOT available. Buyers must make their own arrangements for vehicle pickup and transport.
Special Instructions
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Bid History
Bid History refreshes automatically
Asset ID 12 / Bids 15
ha*****
May 13, 2026 06:21 PM UTC
USD 2,500.00High Bidder
hr*****
May 13, 2026 06:21 PM UTC
USD 2,475.00
ha*****
May 13, 2026 06:20 PM UTC
USD 2,225.00
hr*****
May 13, 2026 06:20 PM UTC
USD 2,200.00
ha*****
May 09, 2026 08:40 PM UTC
USD 2,025.00
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.